Skip to content

Results are limited to Pulser v1.4.0

Product news
You are reading Pulser v1.4.0, an older version of this documentation. Go to the latest version (v1.10.0)

RydbergEOM

class pulser.channels.RydbergEOM(limiting_beam, max_limiting_amp, intermediate_detuning, controlled_beams, mod_bandwidth, custom_buffer_time=None, multiple_beam_control=True, blue_shift_coeff=1.0, red_shift_coeff=1.0)

Bases: _RydbergEOMDefaults, BaseEOM, _RydbergEOM

The EOM configuration for a Rydberg channel.

Parameters:
  • limiting_beam (RydbergBeam) – The beam with the smallest amplitude range.

  • max_limiting_amp (float) – The maximum amplitude the limiting beam can reach, in rad/µs.

  • intermediate_detuning (float) – The detuning between the two beams, in rad/µs.

  • controlled_beams (tuple[RydbergBeam, ...]) – The beams that can be switched on/off with an EOM.

  • mod_bandwidth (float) – The EOM modulation bandwidth at -3dB (50% reduction), in MHz.

  • custom_buffer_time (int | None, default: None) – A custom wait time to enforce during EOM buffers.

  • multiple_beam_control (bool, default: True) – Whether both EOMs can be used simultaneously. Ignored when only one beam can be controlled.

  • blue_shift_coeff (float, default: 1.0) – The weight coefficient of the blue beam’s contribution to the lightshift.

  • red_shift_coeff (float, default: 1.0) – The weight coefficient of the red beam’s contribution to the lightshift.

Attributes

blue_shift_coeff

custom_buffer_time

multiple_beam_control

red_shift_coeff

rise_time

The rise time (in ns).

mod_bandwidth

limiting_beam

max_limiting_amp

intermediate_detuning

controlled_beams

Methods

calculate_detuning_off

Calculates the detuning when the amplitude is off in EOM mode.

detuning_off_options

Calculates the possible detuning values when the amplitude is off.

Signatures

calculate_detuning_off(amp_on, detuning_on, optimal_detuning_off, return_switching_beams=False)

Calculates the detuning when the amplitude is off in EOM mode.

Parameters:
  • amp_on (float | TensorLike) – The amplitude of the EOM pulses (in rad/µs).

  • detuning_on (float | TensorLike) – The detuning of the EOM pulses (in rad/µs).

  • optimal_detuning_off (float) – The optimal value of detuning (in rad/µs) when there is no pulse being played. It will choose the closest value among the existing options.

  • return_switching_beams (bool, default: False) – Whether to return the beams that switch on on and off.

Return type:

AbstractArray | tuple[AbstractArray, tuple[RydbergBeam, ...]]

detuning_off_options(rabi_frequency, detuning_on)

Calculates the possible detuning values when the amplitude is off.

Parameters:
  • rabi_frequency (float | TensorLike) – The Rabi frequency when executing a pulse, in rad/µs.

  • detuning_on (float | TensorLike) – The detuning when executing a pulse, in rad/µs.

Return type:

AbstractArray

Returns:

The possible detuning values when in between pulses.

property rise_time: int

The rise time (in ns).

Defined as the time taken to go from 10% to 90% output in response to a step change in the input.