Building 1D Rydberg Crystals
The following notebook shows a study of many-body dynamics on a 1D system. It is based on 1707.04344 (external). The authors of that paper studied the preparation of symmetry-breaking states in antiferromagnetic Ising chains, by tuning the interaction and driving parameters accross the phase diagram. In this notebook, we reproduce some results of this paper. Since this is a particular experiment not based on certified devices, we will use the MockDevice class to
allow for a wide range of configuration settings.
import numpy as npimport matplotlib.pyplot as pltimport qutip
from pulser import Pulse, Sequence, Registerfrom pulser_simulation import QutipEmulatorfrom pulser.waveforms import CompositeWaveform, RampWaveform, ConstantWaveformfrom pulser.devices import MockDevice1. Rydberg Blockade at Resonant Driving
Section titled “1. Rydberg Blockade at Resonant Driving”We first consider clusters of 1,2 and 3 atoms under resonant (δ=0) driving. If all the atoms are placed within each other’s blockade volume, only one excitation per group will be possible at a time. The Rabi frequency will be enhanced by N
def occupation(reg, j): r = qutip.basis(2, 0) N = len(reg.qubits) prod = [qutip.qeye(2) for _ in range(N)] prod[j] = r * r.dag() return qutip.tensor(prod)Given a value of the maximum Rabi Frequency applied to the atoms, we can calculate the corresponding blockade radius using the rydberg_blockade_radius() method from MockDevice. We use this to arrange clusters of atoms which will experience this blockade effect:
Omega_max = 2 * 2 * np.piR_blockade = MockDevice.rydberg_blockade_radius(Omega_max)print(f"Blockade Radius is: {R_blockade}µm.")groups = 3
def blockade_cluster(N): atom_coords = [ ((R_blockade / N) * x + 40 * group, 0) for group in range(groups) for x in range(1, N + 1) ] reg = Register.from_coordinates(atom_coords, prefix="q") reg.draw( blockade_radius=R_blockade, draw_half_radius=True, draw_graph=False )
resonant_pulse = Pulse.ConstantPulse(1500, Omega_max, 0.0, 0.0)
seq = Sequence(reg, MockDevice) seq.declare_channel("ising", "rydberg_global") seq.add(resonant_pulse, "ising")
simul = QutipEmulator.from_sequence(seq, sampling_rate=0.2)
obs = [ sum(occupation(reg, j) for j in range(i, i + N)) for i in range(0, groups * N, N) ]
res = simul.run(progress_bar=True, method="bdf") return res.expect(obs)
Blockade Radius is: 8.692279598222772µm.
Next we run blockade_cluster(N), which runs the simulation, for clusters of sizes N∈{1,2,3}:
data = [blockade_cluster(N) for N in [1, 2, 3]]
10.0%. Run time: 0.01s. Est. time left: 00:00:00:00
20.0%. Run time: 0.02s. Est. time left: 00:00:00:00
30.0%. Run time: 0.02s. Est. time left: 00:00:00:00
40.0%. Run time: 0.03s. Est. time left: 00:00:00:00
50.0%. Run time: 0.04s. Est. time left: 00:00:00:00
60.0%. Run time: 0.05s. Est. time left: 00:00:00:00
70.0%. Run time: 0.07s. Est. time left: 00:00:00:00
80.0%. Run time: 0.07s. Est. time left: 00:00:00:00
90.0%. Run time: 0.08s. Est. time left: 00:00:00:00
Total run time: 0.08s
10.0%. Run time: 0.02s. Est. time left: 00:00:00:00
20.0%. Run time: 0.05s. Est. time left: 00:00:00:00
30.0%. Run time: 0.07s. Est. time left: 00:00:00:00
40.0%. Run time: 0.13s. Est. time left: 00:00:00:00
50.0%. Run time: 0.17s. Est. time left: 00:00:00:00
60.0%. Run time: 0.22s. Est. time left: 00:00:00:00
70.0%. Run time: 0.27s. Est. time left: 00:00:00:00
80.0%. Run time: 0.34s. Est. time left: 00:00:00:00
90.0%. Run time: 0.39s. Est. time left: 00:00:00:00
Total run time: 0.45s
10.0%. Run time: 1.02s. Est. time left: 00:00:00:09
20.0%. Run time: 1.92s. Est. time left: 00:00:00:07
30.0%. Run time: 2.74s. Est. time left: 00:00:00:06
40.0%. Run time: 3.70s. Est. time left: 00:00:00:05
50.0%. Run time: 4.74s. Est. time left: 00:00:00:04
60.0%. Run time: 5.74s. Est. time left: 00:00:00:03
70.0%. Run time: 7.16s. Est. time left: 00:00:00:03
80.0%. Run time: 8.58s. Est. time left: 00:00:00:02
90.0%. Run time: 10.25s. Est. time left: 00:00:00:01
Total run time: 12.29s
We now plot the probability that a Rydberg state withing the cluster is occupied (by summing the expectation values of the ∣r⟩⟨r∣i operators for each cluster) as it evolves in time, revealing the Rabi frequency of each configuration:
fig, ax = plt.subplots(1, 3, figsize=(18, 3))for N, expectation in enumerate(data): ax[N].set_xlabel(r"Time ($µs$)", fontsize=10) ax[N].set_ylabel(r"Probability of $|r\rangle$", fontsize=10) ax[N].set_title(f"Atoms per cluster N = {N+1}", fontsize=12) avg = sum(expectation) / groups ax[N].plot(np.arange(len(avg)) / 1000, avg)
Only one excitation will be shared between the atoms on each cluster. Notice how the Rabi frequency increases by a factor of N
2. Ordered Crystalline phases
Section titled “2. Ordered Crystalline phases”The pulse sequence that we will prepare is based on the following parameters:
# Parameters in rad/µs and nsdelta_0 = -6 * 2 * np.pidelta_f = 10 * 2 * np.piOmega_max = 2 * 2 * np.pit_rise = 500t_stop = 4500We calculate the blockade radius from the maximal applied Rabi frequency:
R_blockade = MockDevice.rydberg_blockade_radius(Omega_max)a = 7.0
reg = Register.rectangle(1, 11, spacing=a, prefix="q")print(f"Blockade Radius is: {R_blockade}µm.")reg.draw(blockade_radius=R_blockade, draw_half_radius=True)
Blockade Radius is: 8.692279598222772µm.
Create the pulses using Pulser objects:
hold = ConstantWaveform(t_rise, delta_0)excite = RampWaveform(t_stop - t_rise, delta_0, delta_f)sweep = Pulse.ConstantAmplitude( Omega_max, CompositeWaveform(hold, excite), 0.0)seq = Sequence(reg, MockDevice)seq.declare_channel("ising", "rydberg_global")
seq.add(sweep, "ising")
seq.draw()
The pulse sequence we just created corresponds a path in the Phase space of the ground state, which we represent schematically with the following function:
def phase_diagram(seq): ratio = [] for x in seq._schedule["ising"]: if isinstance(x.type, Pulse): ratio += list(x.type.detuning.samples / Omega_max)
fig, ax = plt.subplots() ax.grid(True, which="both")
ax.set_ylabel(r"Interaction Range $R_b/a$", fontsize=14) ax.set_xlabel(r"Detuning $\delta/\Omega$", fontsize=14) ax.set_xlim(-4, 6) ax.set_ylim(0, 3.2) ax.axhline(y=0, color="k") ax.axvline(x=0, color="k")
y = np.arange(0.0, 5, 0.01) x = 2 * (0.6 + 8 * (y - 1.2) ** 2) ax.fill_between(x, y, alpha=0.4)
y = np.arange(0.0, 5, 0.01) x = 2 * (0.8 + 50 * (y - 2.45) ** 2) ax.fill_between(x, y, alpha=0.4)
y = np.arange(0.0, 5, 0.01) x = 2 * (1.0 + 170 * (y - 3.06) ** 2) ax.fill_between(x, y, alpha=0.4)
ax.plot(np.array(ratio), np.full(len(ratio), R_blockade / a), "red", lw=2) plt.show()phase_diagram(seq)
2.1 Simulation
Section titled “2.1 Simulation”We run our simulation, for a list of observables corresponding to ∣r⟩⟨r∣j for each atom in the register:
simul = QutipEmulator.from_sequence(seq, sampling_rate=0.1)
occup_list = [occupation(reg, j) for j in range(len(reg.qubits))]
res = simul.run(progress_bar=True)occupations = res.expect(occup_list)
10.0%. Run time: 0.76s. Est. time left: 00:00:00:06
20.0%. Run time: 1.61s. Est. time left: 00:00:00:06
30.0%. Run time: 2.55s. Est. time left: 00:00:00:05
40.0%. Run time: 3.27s. Est. time left: 00:00:00:04
50.0%. Run time: 3.86s. Est. time left: 00:00:00:03
60.0%. Run time: 4.40s. Est. time left: 00:00:00:02
70.0%. Run time: 4.99s. Est. time left: 00:00:00:02
80.0%. Run time: 5.60s. Est. time left: 00:00:00:01
90.0%. Run time: 6.35s. Est. time left: 00:00:00:00
Total run time: 7.21s
The following function plots the evolution of the expectation values with respect to time:
def plot_evolution(results): plt.figure(figsize=(10, 5)) plt.xlabel("Time (µs)", fontsize=14) plt.ylabel("Rydberg Occupation Probabilty", fontsize=14) for expv in results: plt.plot(np.arange(len(expv)) / 1000, expv)
plt.show()plot_evolution(occupations)
We finally plot the probability of occupation of the Rydberg level with respect to the values of detuning, for each atom in the array:
def heat_detuning(data, start, end): N = len(reg.qubits) time_window = [] x = [] detunings = simul.samples_obj.to_nested_dict()["Global"]["ground-rydberg"][ "det" ][[int(1000 * t) for t in simul.evaluation_times[:-1]]]
for t, d in enumerate(detunings): if start <= d <= end: time_window.append(t) x.append(d / (2 * np.pi))
y = np.arange(1, N + 1)
X, Y = np.meshgrid(x, y) Z = np.array(data)[:, time_window]
plt.figure(figsize=(14, 3)) plt.pcolormesh(X, Y, Z, cmap="hot", shading="auto") plt.xlabel("Detuning/2π (MHz)", fontsize=14) plt.ylabel("Atom in array", fontsize=14) plt.yticks(range(1, N + 1), [f"q{i}" for i in range(N)], va="center") plt.colorbar(fraction=0.047, pad=0.015)
plt.show()heat_detuning(occupations, delta_0, delta_f)
2.2 Rydberg Crystals: Z3 Order
Section titled “2.2 Rydberg Crystals: Z3Z_3Z3 Order”To arrive at a different phase, we reduce the interatomic distance a, thus increasing the interaction range between the atoms. This will lead to a Z3 ordered phase:
a = 3.5reg = Register.rectangle(1, 10, spacing=a, prefix="q")
delta_0 = -4 * 2 * np.pidelta_f = 10 * 2 * np.piOmega_max = 2.0 * 2 * np.pi # btw 1.8-2 * 2pi MHzt_rise = 600t_stop = 2500R_blockade = MockDevice.rydberg_blockade_radius(Omega_max)reg.draw(blockade_radius=R_blockade, draw_half_radius=True)
#hold = ConstantWaveform(t_rise, delta_0)excite = RampWaveform(t_stop - t_rise, delta_0, delta_f)sweep = Pulse.ConstantAmplitude( Omega_max, CompositeWaveform(hold, excite), 0.0)#seq = Sequence(reg, MockDevice)seq.declare_channel("ising", "rydberg_global")seq.add(sweep, "ising")
phase_diagram(seq)
simul = QutipEmulator.from_sequence(seq, sampling_rate=0.1)
occup_list = [occupation(reg, j) for j in range(len(reg.qubits))]
res = simul.run(progress_bar=True, method="bdf")
occupations = res.expect(occup_list)
plot_evolution(occupations)heat_detuning(occupations, delta_0, delta_f)
10.0%. Run time: 2.20s. Est. time left: 00:00:00:19
20.0%. Run time: 4.31s. Est. time left: 00:00:00:17
30.0%. Run time: 6.38s. Est. time left: 00:00:00:14
40.0%. Run time: 8.46s. Est. time left: 00:00:00:12
50.0%. Run time: 10.56s. Est. time left: 00:00:00:10
60.0%. Run time: 12.80s. Est. time left: 00:00:00:08
70.0%. Run time: 14.89s. Est. time left: 00:00:00:06
80.0%. Run time: 16.99s. Est. time left: 00:00:00:04
90.0%. Run time: 19.08s. Est. time left: 00:00:00:02
Total run time: 21.14s
2.3 Rydberg Crystals: Z4 Order
Section titled “2.3 Rydberg Crystals: Z4Z_4Z4 Order”Decreasing even more the interatomic distance leads to a Z4 order. The magnitude of the Rydberg interaction with respect to that of the applied pulses means our solver has to control terms with a wider range, thus leading to longer simulation times:
a = 2.8reg = Register.rectangle(1, 9, spacing=a, prefix="q")
# Parameters in rad/µs and ns
delta_0 = -4 * 2 * np.pidelta_f = 10 * 2 * np.piOmega_max = 2.0 * 2 * np.pi # btw 1.8-2 2pi*MHzt_rise = 600t_stop = 2500R_blockade = MockDevice.rydberg_blockade_radius(Omega_max)reg.draw(blockade_radius=R_blockade, draw_half_radius=True)
#hold = ConstantWaveform(t_rise, delta_0)excite = RampWaveform(t_stop - t_rise, delta_0, delta_f)sweep = Pulse.ConstantAmplitude( Omega_max, CompositeWaveform(hold, excite), 0.0)
#seq = Sequence(reg, MockDevice)seq.declare_channel("ising", "rydberg_global")seq.add(sweep, "ising")
phase_diagram(seq)
simul = QutipEmulator.from_sequence(seq, sampling_rate=0.4)
occup_list = [occupation(reg, j) for j in range(len(reg.qubits))]
#res = simul.run(progress_bar=True, method="bdf")occupations = res.expect(occup_list)
plot_evolution(occupations)heat_detuning(occupations, delta_0, delta_f)
10.0%. Run time: 4.70s. Est. time left: 00:00:00:42
20.0%. Run time: 10.75s. Est. time left: 00:00:00:42
30.0%. Run time: 16.96s. Est. time left: 00:00:00:39
40.0%. Run time: 24.73s. Est. time left: 00:00:00:37
50.0%. Run time: 32.96s. Est. time left: 00:00:00:32
60.0%. Run time: 39.45s. Est. time left: 00:00:00:26
70.0%. Run time: 44.43s. Est. time left: 00:00:00:19
80.0%. Run time: 49.02s. Est. time left: 00:00:00:12
90.0%. Run time: 53.25s. Est. time left: 00:00:00:05
Total run time: 58.02s
